Hardware Tools

WDC’s 65xx microprocessor developer boards are reference designs for your Embedded System Development or System-on-Chip (SoC) Development for either the GDSII or Verilog RTL core usage. We provide a FREE, digital form of the boards in our PCB Design Kit. These kits may be downloaded and used to jump start a design that uses features of the Terbium/65xx technology.

FPGA Based Development Board - Terbi-ECP2Mulator or "Terbi"

Terbi was designed as a hardware emulation platform for design and development with WDC’s 65xx Microprocessor Technology.

Features of Terbi-ECP2Mulator

Lattice ECP2M−50 FPGA with 48 kLUTs, 4147 kbit of Embedded Block RAM, 22 sysDSP™ blocks, 88 18x18 multipliers,10 PLLs, and 270 user I/O pins
Lattice MachXO™ with 640 LUTs and 6.1 Kbit of RAM
USB 2.0 connector and integrated ispDOWNLOAD® cable for JTAG programming the FPGA
Flywire connector for programming using an ispDOWNLOAD cable (available separately from Lattice)
USB 2.0 compatible host connectors for interfacing with WDC’s ProSDK Development Tools
SATA interface with two LVDS signal pairs for high-speed data transfer
Altera Santa Cruz compliant connectors (2 x 40) providing 46 lines of I/O Expansion
100−pin “MESA” connector compliant with T&MT USB PHY Standards
28−pin expansion header for I/O. Compatible with WDC’s Parallel IO Board
LCD connector for character displays, with contrast potentiometer
38−pin MICTOR connector for high speed Logic Analyzer connection
25 MHz oscillator with clock distribution buffer
4−pin DIP half socket for user selected oscillator
One HEX Rotary Switch
Dual Character 7−segment Display
8 Activity LEDs
8 Test Points
4 Pushbutton switches for debug and user input
Green LED to indicate the proper operation of the 3.3V and 2.5 V power supplies
Blue LED which shows the configuration status (“DONE”)
Red LED to signal that the FPGA can be configured (“INIT”)
Yellow LED indicating the FPGA PROGRAM# I/O is asserted (“PROGRAM#”)
Program key to initiate the configuration sequence of the FPGA from SPI Flash memory
Reset key
5V power supply
Switching regulator for the generation of the 3.3V I/O voltage and the 1.2Vcore voltage
Robust power configuration with jumper selections to power board with either of the two USB ports or the DC input jack

Terbi User Guide

65xx Chip Based Development Boards

WDC has four Chip Based Development boards. Click on the board below for more information. The design files for these boards are also available in the PCB Design Kit.

W65C02DB The W65C02DB features the W65C02S – a low power, cost effective 8–bit microprocessor.		W65C816DB The W65C816DB features the W65C816S – a 16–bit microprocessor for extended memory addressing.
W65C134DB The W65C134DB features the W65C134S microcontroller – a complete 8–bit computer.		W65C265DB The W65C265DB features the W65C265S microcomputer – a complete 16–bit computer developed for Hi–Rel applications and where minimum power is required.

Links to our Developer Board Schematics:


Terbi-ECP2Mulator	W65C02DB	W65C816DB

W65C134DB	W65C265DB